plasticote » Plasticote 70

CRC Plasticote 70

Clear Acrylic Lacquer Conformal Coating for Printed Circuits

CRC/Barcode	Pack Sizes Available
2043 9310832020437	Aerosol 300 g, pack size 6

"Qty" defaults to standard 'Outer' Qty.

CRC Plasticote 70 is a clear acrylic lacquer ideal for the protection and insulation of printed circuit boards and electronic parts.

It forms a flexible, clear film that protects printed circuit boards from current creepage and short circuits and is resistant to environmental effects such as moisture, salt spray, atmospheric oils, dust, oxidation, diluted acids, alkalis, alcohol and humidity.

Three coats will provide a dielectric resistance of 16kV. Allow 30 minutes drying time between coats to facilitate build up.

The containing UV indicator allows for instant quality control of the applied coating.

CRC Plasticote 70 is effective in a wide temperature range, the protective film softens only at 100°C. It readily endures temperatures down to -70°C, provided the film is not subjected to mechanical stress.

CRC Plasticote 70 is also suitable for protecting maps, charts, legal documents and drawings from water.

Features & Benefits

Ready to use – No additional mixing or chemical additives required
High di-electric strength – Ideal for electrical/electronics applications
Environmental protection – To significantly extend product life
Easy application – Singe component system
Fast drying – Recoat anytime, full cure in 12 hours
Flexible clear film – Also suitable for protecting maps, charts, legal documents, drawings and other flexible items
Long-Term Indoor/Outdoor Protection – Protects for up to 2 years for long term storage of parts, equipment and machinery. Offers up to 2 years protection to electrical connections etc.
UV Indicator – The use of an ultra-violet light instantly allows to detect areas without CRC Plasticote 70 protection
Can be soldered through – Easy repair
Aerosol – Easy application, no clean up required
Ideal for touch-ups for electronic printed circuits after repair
Wide Temperature Range – Effective from -70°C to 120°C

Uses

Printed circuit boards – To protect against creepage
Protects components from condensation and moisture – Insulates cables and wires. Coats terminal strips, screw connections and switch boxes
Aerial protection – Against atmospheric corrosion for VHF, TV and radio aerials
Marine radio and components – Protects against salt water corrosion
Ideal as a universal protective coating – Maps, charts, legal documents, technical drawings, architectural plans

Application Method

Aerosol

TOP