CRC Minute Mend

Epoxy Putty For Quick And Easy Permanent Repair

Related categories:
Resin / Glues/ Fillers, Panel & Marine Fillers

CRC/Barcode	Name	Pack Size
14070 078254140704	Tube 114 g	12

FIND A STORE

BROCHURES

Minute Mend is a versatile epoxy putty packaged in a convenient one piece stick for immediate, permanent repairs. It can be used to reshape, rebuild or permanently repair a variety of surfaces and applications. It is hand-kneadable and mixes in just one minute. Minute Mend is ideal to permanently repair scratches, gouges and holes, to perform routine electrical jobs and to stops leaks. It can be used for plumbing, electrical, ceramic, vehicle and machinery repair

Once fully cured Minute Mend epoxy putty can be sanded, filed, tapped, sawed, drilled, machined, stained or painted. It also bonds to both wet and dry surfaces.

Features & Benefits

Convenient – Easy, no mess and is ready to use in less than one minute
Multiple Uses – Ideal to reshape, rebuild, or permanently repair a variety of surfaces and applications.
Cures steel hard.
Will not sag, run or drip
Good adhesive strength
Good gap filling properties
Excellent anchoring properties
Versatile - Bonds tenaciously to fiberglass, metal, wood, steel, aluminium, concrete, ceramic, plastic and glass.
Specially Formulated - Bonds to both wet and dry surfaces and can be applied under water.
After full cure, Minute Mend epoxy putty can be sanded, tapped, sawed, drilled, machined, stained or painted.
Heat resistant to 120⁰C continuously or 177⁰C intermittently.
No Fire or Flash Point - Safe for use in many applications.
M.S.D.[L.]™-Material Safety Data Label Provides instant access to current safety information should an accident or OSHA inspection occur. Helps comply with OSHA Hazard Communications Standard 29 CFR 1910.1200.

Uses

To permanently repair scratches, gouges and holes in drums, tanks, castings, molds, sinks, tubs and leaky gaskets
To perform routine electrical jobs such as mounting terminal blocks, packing wires and repairing breaker boxes
To seal and stop leaks, even under water – Gutters, downpipes etc.
To be used in plumbing, electrical, ceramic, as well as vehicle and machinery repair.
To repair and replace – Timber, metal, masonry, many plastics and ceramics.
To mend – Appliances, sports equipment, toys etc.
To patch – Chipped concrete, bricks, floors, blocks…
To form – Missing parts, knobs…
To anchor – Screws, housings, bolts…
To attach – Signs, fixtures….
To balance table/chair/desk legs…
Epoxy putty products

Product Selection Guide

View the ADOS Adhesive Selection Guide

Approvals

Meets 1998 USDA guidelines for use in meat and poultry plants

Typical Properties and Characteristics:

Appearance	Grey/green 2-Part epoxy stick
Working Life	30 minutes
Full Cure	24 hours
Specific Gravity	1.9
Shore D hardness (full cure)	75
Lap shear tensile strength on steel	800-1000 lbs
Temperature limitations	120ºC continuous, 177ºC intermittent
Electrical resistance	30,000 megaohms
ASTM D-149 (Dielectrical Strength)	300 volts/mil
Shrinkage	Less than 1%
Chemical Resistance	Ketone, alcohol, halogenated hydrocarbon, esters, aqueous salt solution, dilute acidic/basic solution