CRC ADOS Builders Fill 250ml
DESCRIPTION
CRC ADOS Builders Fill is a permanent repair or filler that can be used on a variety of surfaces. It is ideal to repair gaps, cracks, holes, dents and for replacing rotten or missing wood sections. Once set it can be cut, sawn, drilled, chiselled, nailed, filed, sanded, painted, and screwed into.
Applications
CRC ADOS Builders Fill is suitable for use on wood, brick, masonry, ceramics, fibreboard, plasterboard, roofing, steel and most other materials.
Features/Benefits:
- Permanent repair or filler: Repairs & fills gaps, cracks, holes & dents
- Versatile: Can be used on a variety of surfaces, including as a wood filler
- Fast cure: Sets rapidly in hot weather or in direct sunlight. Cures faster than common air-drying fillers
- Superior trimming & shaping qualities: Can be trimmed while still semi-hard
- Smooth & easily applied with exceptional adhesion, will not sag or shrink
- Cures hard & will not rot. Waterproof when cured
CRC ADOS Builders Fill is smooth and easily applied with exceptional adhesion. It can be trimmed while still semi-hard. CRC ADOS Builders Fill cures by chemical reaction so it will not shrink or sag like common air-drying fillers. The two pack system can be cured fast or slow by increasing or decreasing the ratio of hardener to filler. CRC ADOS Builders Fill cures hard and will not rot. It is waterproof when cured.
How to use CRC ADOS Builders Fill
Directions:
- Clean, sand, roughen up surface to be filled.
- Mix the hardener into the filler at a ratio of 1:50 (Hardener:Filler). This would be approximately ¼ teaspoon of hardener mixed into about 4 tablespoons of filler.
- Mix on any clean disposable material such as hardboard. Work paste by folding from side to side until the colour has changed throughout.
- Do not use mixing tool for taking additional CRC ADOS Builders Fill from tin.
- When mixed, use immediately.
- Leave repairs slightly overfilled to allow for smoothing down.
- It is easier to smooth off most of the excess before fully cured condition is reached, this can be done with a Surform or Dreadnought file. Ordinary files and sandpaper can be used when fully cured.
- Clean tools immediately after use.
Note: Always mix by folding to avoid air bubbles. Do not stir.
| Barcode | 9403097070726 |
|---|---|
| Brand | ADOS |
| Item Number | 1010922 |
| Unit Depth (mm) | 120.0 |
| Unit Height (mm) | 63.0 |
| Unit Package Description | 250 Millilitre Can |
| Unit Size | 250 Millilitre |
| Unit Width (mm) | 120.0 |
| Units per Case | 6 |