CRC Paint It Gloss Silver 400ml
DESCRIPTION
CRC Paint It Gloss Silver is a quick-drying enamel spray paint with a superb finish for general use. It provides excellent coverage and dries to a durable, tough petrol-resistant coating to protect metal and other surfaces. CRC Paint It Gloss Silver is recommended for interior and exterior use on wood, metal, plaster, and masonry. It requires no primer when applied to clean, rust-free steel. If priming or surface preparation is necessary, use CRC Prep It. For aluminium or iron substrates, prime with CRC Etch It prior to painting with CRC Paint It Gloss Silver.
Applications
Recommended for interior and exterior use on wood, bare metal, plaster, masonry, glass. Ideal for use on structural steel, machinery, storage tanks, fencing, metal doors, outdoor garden furniture. Drums, steel pipes and railings, metal doors, ladders, cabinets, furniture.
Features/Benefits:
Quick-drying enamel paint. Touch dry in 15 minutes. Top quality hardened enamel finish. Scratch and solvent resistant. Recommended for interior and exterior use. On wood, bare metal, plaster, masonry, glass. Corrosion protection. Ready-to-use aerosol. Easy application, no clean up.
CRC Paint It Gloss Silver is a quick drying enamal paint with a superb finish for general use. It provides excellent coverage and dries to a durable tough petrol resistant coating to protect metal and other surfaces. CRC Paint It Gloss Silver is recommended for interior and exterior use on wood, metal, plaster, and masonry. It requires no primer when used on clean rust free steel. If priming or surface preparation is necessary use CRC Prep It. For aluminium or galvanised iron substrates prime with CRC Etch It prior to painting with CRC Paint It Gloss Silver.
Directions:
- Ensure surface is clean, dry, and free from rust & dirt.
- Previously painted surfaces must be sanded smooth.
- Mask surrounding area with newspaper or similar material to avoid overspray.
- Shake can until agitator ball is moving freely. Shake for an additional minute to ensure contents are thoroughly mixed.
- Holding the can approximately 25cm from the surface, spray with a uniform motion. Do not apply too heavy an application in one coat.
- Build the film up with a series of light coats, then allow to dry for 10 minutes before applying the final coat.
- Touch Dry: 15 minutes
- Recoat: Within 30 minutes
- Clean-Up: General all purpose thinners
| Barcode | 9403097033769 |
|---|---|
| Brand | CRC |
| Item Number | 1010339 |
| Unit Depth (mm) | 65 |
| Unit Height (mm) | 205 |
| Unit Package Description | 400 Millilitre Aerosol |
| Unit Size | 400 Millilitre |
| Unit Width (mm) | 65 |
| Units per Case | 6 |

