CRC Rust Converter Aerosol 425g - Neutralises Rust

CRC Rust Converter rapidly neutralises rust and turns rust into a black usable surface for priming and painting. It can be used on cars, truck frames/beds, boats and trailers, railings, fences, iron or steel furniture, equipment, tools, and more.

Directions:

1. Apply only when temperatures are between 10°C and 32°C.
2. Ensure surrounding surfaces are clean. Remove dirt, grease, oil, and other contaminants.
3. Remove blistered, loose paint, other surface coatings and loose or heavy rust scale with a scraper or mechanical sander.
4. Use of rubber gloves is recommended.
5. Shake well before using.
6. Spray the area to be treated with a heavy coat.
7. Apply a second coat if the initial coat doesn't completely convert the rusted area.
8. When finished using, turn the can upside down and spray to clear the product from the valve and spray head. Wipe the spray head clean with a cloth or paper towel.
9. Allow 4 hours cure time between overcoating.
10. If painting, for the best long-term results, spray with CRC Metal Armour to provide a protective primer coat.

Note: CRC Rust Converter may not prevent further rusting when applied to heavy rust scale. CRC Rust Converter is not suitable as a rust preventative coating and should never be used to treat steel which is new or not rusty. CRC Rust Converter is not designed for nonferrous metals, galvanised or stainless steel.

MPI Approved C23 (All Animal Product Except Dairy)